14SG (12+2ch - 2.4GHz)


14-Channel 2.4GHz Computer Radio System

Specifications

Outline

Telemetry, FASST and S-FHSS support!!

Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It's also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.

The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SG's 3-axis gyro support which makes the 14SG the perfect system for flybarless flight!

14SG

Setting

  • display

    Telemetry screen

  • display

    FASSTest, FASST, S-FHSS selectable

  • display

    Servo speed screen

  • display

    Quick select allow easy model select.

  • display

    RX battery warning configulation

  • display

    3 axis gyro function for heli.

Characteristics

  • display

    R7008SB FASSTest telemery receiver is equipped as a standard.

  • display

    NiMH 6.0V 1800mAh battery afford to long period use.

  • display

    Standard equipped ball bearing sticks.

  • display

    Puts HOME/EXIT button onfront panel.

System Overview

  1. Channels: 12 proportional, 2 switched
  2. Compatible with FASSTest, FASST and S-FHSS protocols
  3. FASSTest telemetry compatible with telemetry sensors (sold separately)
  4. Free user-updatable software
  5. 30-model memory
  6. 10-character user naming
  7. 10-character model naming
  8. Airplane, helicopter and glider programming
  9. Large(73.7 x 39.6mm) backlit LCD screen with 128 x 64 resolution
  10. Sensor Touch programming
  11. SD Card compatibility for external model memory and software updates
  12. Left and right assignable slider switches
  13. Two assignable rotary knobs
  14. Six assignable three-position switches
  15. One assignable momentary two-position switch
  16. One assignable two-position switch
  17. Comfortable rubber grips on the sides and back
  18. Wide top switch spacing
  19. Adjustable stick tension
  20. Dual ball bearing gimbals
  21. 4 vibration warning types
  22. Home/Exit; User Menu/Servo Monitor buttons
  23. Audio earphone jack (for telemetry alarms)
  24. 6V 1800mAh NiMH battery pack
  25. User stick calibration
  26. Trainer system
  27. Servo speed adjust
  28. 5 programmable mixes
  29. V-tail, Ailvator, winglet, motor mixing
  30. Trim mix
  31. Logic switch (condition switch only)
  32. Internal programmer for S.Bus servos
  33. User menu
  34. Servo monitor (neutral and moving tests)
  35. 2 count up/countdown timers
  36. Integral timer
  37. Model timer
  38. Quick model select

Airplane Features

  1. 7 different wing types
  2. 3 different tail types
  3. 2 different rudder types
  4. Flap setting menu
  5. Differential ailerons
  6. Aileron to camber flap mixing
  7. Aileron to brake flap mixing
  8. Aileron to rudder mixing
  9. Rudder to aileron mixing
  10. Rudder to elevator mixing
  11. Camber mixing
  12. Elevator to camber mixing
  13. Camber flap to elevator mixing
  14. Snap roll mixing
  15. Airbrake mixing
  16. V-Tail mixing
  17. Ailvator
  18. Winglet
  19. Motor mixing
  20. Fuel mixture mixing (single and twin)
  21. Gyro mixing
  22. Throttle curve (5-point)
  23. Pitch curve (5-point)
  24. Idle down

Helicopter Features

  1. 6 swash plate types
  2. Pitch/throttle curves (5-point)
  3. Throttle hold
  4. Swash mix
  5. Throttle mix
  6. Pitch to rudder mixing
  7. Fuel mixture
  8. Gyro (Flybarless support)
  9. Governor (700-3500 rpm)
  10. Hover pitch
  11. Hover throttle
  12. High/low pitch
  13. Swash AFR
  14. Swash setting (mixing rate, linkage compensation, speed compensation)
  15. Swash ring (electronic)
  16. Throttle cut

Glider Features

  1. 11 different wing types
  2. 3 different tail types
  3. 2 different rudder types
  4. Flap setting menu
  5. Differential ailerons
  6. Aileron to camber flap mixing
  7. Aileron to brake flap mixing
  8. Aileron to rudder mixing
  9. Rudder to aileron mixing
  10. Rudder to elevator mixing
  11. Camber mixing
  12. Elevator to camber mixing
  13. Camber flap to elevator mixing
  14. Butterfly mixing
  15. Butterfly to elevator mixing