Futaba 4pm

4PM

This mid-range model features Super Response mode (SR mode) for the fastest response, and it also supports the wireless control function of the MC970CR. It is also compatible with Kyosho's Mini-Z. The 4PM is a high-performance instrument with a lot of features.

Core Features

Super Response mode

Amazing reaction speed is realized by the combination of the corresponding receiver and servo.

Wireless Settings

Corresponding servo and motor controller parameters can be changed wirelessly while mounted on the body

Kyosho Mini-Z mode

Compatible with Kyosho's Mini-Z (MR-03EVO).

Telemetory functions

By using the corresponding optional telemetry sensor, the vehicle information can be checked in real time on the 4PM screen.

Super Response mode

Super Response mode is the fastest response mode that can be selected when using the corresponding Futaba receiver and servo.The response time from when you operate the steering wheel at hand to when the servo starts to operate is 28% faster than the competitor's system!!
This reaction speed gives you an infinitely more direct operating feel.

Wireless Setting

T-FHSS SR

7PXR has a wireless setting function.
In the conventional method, rewriting the parameters of the S.BUS servo required a wired connection between the transmitter and the servo. This wireless setting function allows you to quickly change settings wirelessly while the S.BUS servo is mounted on your car.

Specifications

System Compatibility T-FHSS SR, T-FHSS, T-FHSS MINI-Z mode, S-FHSS
Power Requirement Three AA batteries or FT2F1100B, FT2F1700B FT2F2100B
External memory microSD
Software Update Available using microSD card
Model Memory The 4PM is equipped with the model memory for 40 cars. You can use up to 10 alphanumeric characters and symbols for model names, so you can create a name that is easy to understand. The model copy feature makes it easy to create multiple model memories with subtly different settings.
MC-Link This dedicated function allows you set up the link software so that your 4PM can control variable frequency and other data changes in Futaba speed controllers(ESC) such as MC950CR etc.
S.BUS Servo The parameters of the S.BUS servo can be set in 4PM and can be set wirelessly when using the R334SBS or R33SBS-E.
Steering mixing Independent steering servo settings on the left and right ensure smooth cornering.
Brake mixing for large cars This is a brake mixing for the front and rear wheels of a 1/5 GP car that can be adjusted separately.
Gyromixing The sensitivity of Futaba's gyro for cars can be adjusted.
4WS mixiing This function controls the same phase and reverse phase of 4WS types such as crawlers.
Dual ESC mixing ESC's at the front and rear care controlled independently
CPS-1 mixing With the optional channel power switch CPS-1, LED lighting and blinking can be controlled in accordance with the steering and throttle operation as well as the switch.
Tank mixing Mixing function for tracked vehicles such as tanks. You can set the pivot and super pivot.
Anti-skid brake system When operating an engine car or other vehicle, this function allows braking so that the tire does not lose grip even when braking in a corner.
Traction This function allows the throttle servo to move forward intermittently to apply traction.
Throttle acceleration It is possible to minimize the time lag until the clutch and brake are connected in an engine car.
Throttle speed Sudden trigger manoeuvres on slippery surfaces will only cause unnecessary wheel spin and not smooth acceleration. This feature allows for smoother and easier handling, while reducing battery drain on the vehicle.
Steering speed If you feel that the steering servo is too fast, you can make adjustments to reduce the servo operation speed.
Racing time The lap time can record 100 lap times and total time. It can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.

Manual and Updates

4PM Manual (English)

Latest Software

Compatible Receivers

Name Modulation Telemetry function Output ports antenna Size Weight
R334SBS T-FHSS SR
T-FHSS
Supported S.BUS2 & 4 ch PWM Diversity antenna
(Long antenna)
33.9 x 22.3 x 11.3mm 7.3g
R334SBS-E T-FHSS SR
T-FHSS
Supported S.BUS2 & 4 ch PWM Diversity antenna
(Short antenna)
33.9 x 22.3 x 11.3mm 7.3g
R314SB T-FHSS Supported S.BUS2 & 4 ch PWM Single antenna 35.1 x 23.2 x 8.5mm 6.6g
R314SB-E T-FHSS Supported S.BUS2 & 4 ch PWM Single built-in antenna 35.1 x 23.2 x 12.5mm 7.0g
R2008SB S-FHSS Unsupported 8 ch PWM Diversity antenna 24.9 x 42.8 x 14.0mm 9.5g
R2104GF S-FHSS Unsupported 4 ch PWM Single antenna 39.0 x 26.0 x 10.0mm 8.0g
R204GF-E S-FHSS Unsupported 4 ch PWM Single built-in antenna 35.1 x 23.0 x 8.5mm 6.0g
R203GF S-FHSS Unsupported 3 ch PWM Single antenna 39.0 x 26.0 x 10.0mm 8.0g
R202GF S-FHSS Unsupported 2 ch PWM Single antenna 35.1 x 23.0 x 8.5mm 5.9g

Compatible
Telemetry Sensors

Futaba telemetry system can check various data in real time.
The temperature sensor that measures the temperature around the cylinder in the needle set and the temperature of the power battery, and various types of rotation sensors that monitor the engine speed can be used.

SBS-01RB
Brushless Rotation Sensor

Connect to brushless motor or amplifier.
Measurement range : 360 to 300,000 rpm.

FUTABA CODE : EBB1138

SBS-01RM
Magnetic Rotation Sensor

Measurement range : 360 to 300,000 rpm.

FUTABA CODE : EBB1106

SBS-01T
Temperature Sensor

Ideal for measuring engine head temperature
Measurement temperature range: -20 to 200 degrees

FUTABA CODE : EBB1107

SBS-01TE
Temperature Sensor

It is a type to be attached to motors.
Measurement temperature range: 0 to 125 degrees

FUTABA CODE : EBB1108

SBS-01V
Voltage Sensor

Measurement temperature range: 0 degrees to 125 degrees
Measuring range: 0 to 100V

FUTABA CODE : EBB1104

SBS-01C
Current Sensor

Measurement voltage: 0 to 70 volts
Measurement current: 0 to 150 amps
The current and voltage consumption of the power battery during running can be measured.

FUTABA CODE : EBB1164

Optional Parts

INDUCTIVE CHARGER
ICS LF-01
EBB1173

LiFe Battery
FT2F2100Bv2
EBA0135

LiFe Battery
FT2F1700Bv2
EBA0140

LiFe Battery
FT2F1100B
EBA0148